Oil Fluid Extractor N Brake Bleeder
 

9.5 Litre Manual | Air Operated Oil Fluid Extractor & Brake Bleeder

Easy to operate,suitable for extracting Engine,Gear Oil,ATF,Coolant, Water,Brake Fluid Bleeding etc.

  • Three air outlets with check valve design on handle and tank for easy and quick air pressure release from the extractor.
  • Safety device for automatic cut-off during oil fluid extracting.
  • 4 x 8mm brake bleeder siliocn hose x 1.5m
  • 7.8 x 9.8mm nylon suction hose x 1m
  • 5.3 x 6.7mm nylon suction hose x 1m
  • 3.5 x 4.5mm nylon suction hose x 1m
  • Dipstick x 1m
  • Oil Extraction Time : approximately 2min 20 secs / 4 lite
  • Air inlet : 1/4" Nitto type plug
  • Weight / Size : .5kg / 60(H) x 37(W) x 29(W) cm
SKU :OFE95
Country of Origin : Taiwan
1unit x s$258.00
2units x s$254.00
4units x s$250.00
Stock : 1unit available
: Flyer

10 Litre Manual | Air Operated Oil Fluid Extractor & Brake Bleeder

Easy to operate, suitable for extracting engine,transmission oil, brake fluid, coolant, water..etc.

  • Design for extracting the engine oil, brake fluid ATF fluid and other fluid of motorcycles and vehicles. Not limit to any places; perfect for working on vehicles in the garage or outdoors, and also for aquarium.
  • Brake Bleeding Hose-- Makes your oil extractor multi-functional. One new brake oil silicon hose 4x8mm X 2 Meter (78.7 inch) with check valve to avoid back flow when bleeding. The length is longer than normal for use on large vehicles
  • Different sizes of Nylon tubes-- With 4 sizes of tubes which can go into the bottom of oil pan. Nylon oil hoses B: 7.8x9.8mm X 1M C:5.3x6.7mm X 1M D:4x6mm X 1M E:3.5x4.5mm X1M; B hose can be connected to (C,D or E ) hose and it will be 2 Meter length. To reach the very bottom of the reservoir and suck up the fluid.
  • Large Capacity-- 10L in capacity (holds up to 2.6 gal of fluid ) which is perfect for cars with large engines without stopping the oil changing during the extraction.
  • Two-Way Mode for Oil Change-- The pneumatic way for higher speed of oil change ; just need to connect with air compressor. Manual operation requires no other equipment.
SKU :OEB100
Country of Origin : Taiwan
1unit x s$
2units x s$
4units x s$
Stock : Nil
: Flyer

15 Liter Air / Manual Oil Extractor/ Fluid Extractor & Brake Bleeder

suitable for extracting engine,transmission oil, brake fluid, coolant, water..etc.

  • 15 liter capacity (holds up to 3.9 gal of fluid ) which is perfect for cars with large engines without stopping the oil changing during the extraction.
  • Oil extractors are made of polypropylene which can stand up 35°F~200°F's fluids.
  • Extract the engine oil, Brake fluid, ATF fluid and other non-corrosive and non-thick fluid of motorcycles and vehicles.
  • One extra upgraded brake oil silicon hose 4x8mm X 2 Meter (78.7 inch) Long with check valve to avoid oil back flowing when bleeding. With the storage hose to collect oil hoses easily, and duster cover to avoid any dust and dirt.
  • Fast extraction speed of 1.6L /min.
  • Different sizes of Nylon tubes/ Extra 3.5x4.5mm Thinnest One
  • With 4 diameters of tubes which can go into the bottom of oil pan.
  • Nylon oil hoses B: 7.8x9.8mm X 1M C:5.3x6.7mm X 1M D:4x6mm X 1M E:3.5x4.5mm X1M.
  • B hose can be connected to (C, D or E ) hose and it will extend to 2 Meter length. To reach the very bottom of the reservoir and suck up the fluid.
  • Weight / Size : .4.5kg / 59(H) x 25(W) x 25(W)cm
  • Note: DO NOT USED this extractor on Gasoline, and fluid with high volatility, high corrosion, high alkalinity or acidity high temperature.
SKU :OEB150
Country of Origin : Taiwan
1unit x s$298.00
2units x s$
4units x s$
Stock : Nil
: Flyer

 


 

Prices & Stocks are subjected to change without prior notice