Hot In-Demand Top Seller

10 Litre Two Way Air Operated ATF Extractor Dispenser Refill Set

Used to extract, transfer and dispense Auto Transmission Fluid quickly, safely and very clean.

  • 10 litre capacity reservoir with volume guide.
  • One touch adapter for ATF oil dispensing.
  • 1m nylon hose + 2m PU hose with touch control dispensing gun
  • 15pcs adaptore + carrying case
    Air Inlet : 1/4" with Nitto type plug
  • Weight : 5.4kg
SKU :ATF10P
Country of Origin : Taiwan
1unit x s$298.00
2units x s$292.00
4units x s$286.00
Stock : 1 unit available
: Flyer

9.5 Litre Manual | Air Operated Oil Fluid Extractor & Brake Bleeder

Easy to operate,suitable for extracting Engine,Gear Oil,ATF,Coolant, Water,Brake Fluid Bleeding etc.

  • Three air outlets with check valve design on handle and tank for easy and quick air pressure release from the extractor.
  • Safety device for automatic cut-off during oil fluid extracting.
  • 4 x 8mm brake bleeder siliocn hose x 1.5m
  • 7.8 x 9.8mm nylon suction hose x 1m
  • 5.3 x 6.7mm nylon suction hose x 1m
  • 3.5 x 4.5mm nylon suction hose x 1m
  • Dipstick x 1m
  • Oil Extraction Time : approximately 2min 20 secs / 4 lite
  • Air inlet : 1/4" Nitto type plug
  • Weight / Size : .5kg / 60(H) x 37(W) x 29(W) cm
SKU :OFE95
Country of Origin : Taiwan
1unit x s$268.00
2units x s$263.00
4units x s$257.00
Stock : 1unit available
: Flyer

Heavy Duty Brake Fluid Bleeder c\w 2Litre container

SKU :BFB67
Country of Origin : Taiwan
1pc x s$138.00
3pcs x s$135.00
5pcs x s$ 133.00
Stock : 2units avalable
: Flyer

  • Professional Heavy Duty Brake Fluid Bleeder
  • Suitable for cars, Busese & Heavy Duty Commercial Trucks
  • Unit comes with 1.5m silicon hose with universal rubber adapter
  • Operation automatically stop brake fluid bleeding once the fluid reaches the safe volume.
  • Low noise level during operation Unit net weigh is less than 1 kg, easy to operate and carry.
  • Air Inlet : 1/4" Nitto Type Plug
  • Average air consumption : 2 CFM
  • Working air pressure range : 40 to 170 psi Temperature range: -3°F to 140°F

SST48 Portable Side Slip Tester | Toe Gauge

SST48 was introduced into Singapore marketplace since year 1997

  • Checks the alignment of steered wheels on cars and light commercials.
  • It is a roller bearing platform over which one front wheel is slowly driven with the wheels in their straight ahead position.
  • Tests accuracy in only 5 minutes.
  • Easy and simple to operate with no technical knowledge needed.
  • Weight 1Kg., Width 270mm, Lenght 470mm, Height 20m
SKU : SST48
Country of Origin : UK
1pc x s$198.00
3pcs x s$192.00
5pcs x s$188.00
Stock : Nil
: User Guide

Panel Dent Suction Cup Lifter/ Puller -100mm (4") Cup Diameter
SKU : PDP100
Country of Origin : Taiwann
1pc x s$52.00
2pcs x s$51.00
4pcs x s$49.00
Stock :18pcs available
  • Quick Release Slap On Suction Cup
  • The cups are made from durable rubber & the lightweight frame from high density aluminium alloy
  • A handy release lever is fitted to each panel cup for speed & ease of use.
  • Cup Diameter : 100 mm ( 4")
  • Weight : 385g
  • Capacity = 15kg

Universal Petrol Engine Compression Tester
  • Economical Compression Tester
  • Suitable for Cars, Light Commercial Vehicles, Motorcycle, Small Engines, ATV & etc
  • Includes 10mm, 12mm, 14mm, 16mm & 18mm screw-in adaptors
  • Includes rubber gauge protector
  • 460mm long Rubber Hose with quick coupler
  • 186mm long Straight Push on adaptor with rubber cone
  • 186mm long Angled Push on adaptor with rubber cone
  • Range 0-300psi ( 0-2000Kpa)
  • Sturdy blow moulded carrying case for safe storage
SKU :CT723
Country : Taiwan
1pc x s$95.00
3pcs x s$92.00
5pcs x s$90.00
Stock :
: Flyer

Multi-Purpose Panel Suction Cup Lifter - 100 mm ( 4") Cup Diameter

Quick Release Slap On Suction Cup. Handy trigger release allows for very quick release of cup vacuum.

  • Designed for quick removal of raised floor panels, very fast and effective.
  • Widely used in data, clean rooms, automotive windscreen installation work etc.
  • Weight : 660 g
  • Length :230mm
  • Capacity: 30 kg
  • Cup Diameter :100 mm ( 4")
  • Casing: High density aluminum alloy
SKU : FPL30
Country of Origin : Taiwan
1pc x s$86.00
2pcs x s$85.00
4pcs x s$83.00
Stock :8pcs available
: flyer

Air Powered Smart Eraser - Decal |Sticker | Oxide film| Stubborn Dirt | Paint Spots Remover

  • The ASE24 Smart Eraser is designed to get rid of any kind of adhesives stickers, removal of decal pinstripes, double sided tapes and mouldings on plastic or metal painted surfaces.Adhesive and tape left on a panel, and stubborn cracked and hardened vinyls can be difficult to remove.Old pin stripes that are hard and UV damaged will usually just break off into little pieces and be very difficult and frustrating to remove.
  • Only applying gentle pressure, the tape and adhesive is whisked away
  • Removing the unwanted markings is fast, time saving and clean without causing any damage to the original paint surfaces.
  • The original paint surfaces will be free from marks and remain as good as it is.
  • Very long lasting and terrific value.
  • A special 90mm x15mm eraser rubber wheel is included in the set
  • Wheel : 90 mm
  • Max Speed : 3,600 rpm
  • Net Weight : 0.84 kg
  • Length : 225 mm
  • Air Cons. : 0.61 m3/min
  • Air Inlet : 1/4"
  • Hose Size : 9.5 mm (ID)
  • Sound Pressure : 84 dBA
  • Air Pressure : 90 psi
  • Vibration : < 2.5 m/S2
SKU :ASE24
Country of Origin : Taiwan
1pc x s$89.00
2pcs x s$87.00
3pcs x s$85.00
Stock : 3pcs available
: Flyer

Siphon Fluid Transfer Hand Pump

Easy to carry and store,great for transferring gasoline,diesel, fluid, fish tank water .NOT suitable for any chemical liquids & drinking water

  • Durable Rubber Transfer Hose -- 1.82 meters (72-inch) long rubber hose, with two fixed hose clips to secure it in place.
  • Suitable for trasfering gasoline, diesel, kerosene, machine oil. lubricant, water and common liquids.
  • Easy to Use -- Lightweight and portable siphon hand fuel pump, suitable for various vehicles without anti-theft filter net, such as bush cutter, lawnmower, hedge trimmer, etc.
SKU :SHP19
Brand/Country : Taiwan
1pc = s$28.00
3pcs = s$27.00
5pcs = s$26.00
Stock : 5pcs available
: Flyer

Tyre Inflator with 8cm Large Dial Gauge c\w Twin Hold-On Chuck
  • Top Professional Quality Tyre Inflator Gauge
  • 3 functions - to deflate, inflate and check tyre pressure
  • Suitable for fleet workshops use on Motorcycle, Cars & Commercial Vehicles
  • Large Dial Gauge : 8cm diameter ( 3.14")
  • Gauge Reading 0-1200Kpa ( 0-170psi )
  • Inflator Hose Length = 60cm (24")
  • Inflator Hose rating = 300PSI
  • Gauge with Rubber protective housing.
  • Air Inlet connection = PT1/4" Nitto type plug
  • Twin Hold-On valve connector

SKU : TIG98
Country of Origin : Taiwan
1pc x s$113.00
3pcs x s$110.00
5pcs x s$108.00
Stock : 3pcs available
: User Guide

Spark Plug Wrench c\w Bi-Hex (12 points ) Torque Limiting Socket.

It will automatically trip ( free turning ) when reaching the desired torque.

It prevents over tightening and resulting in stripped threads. No need to have the hand tightening feeling!!

  • 14mm Bi-Hex (12points)s drive spark plug socket wrench
  • Max. Torque 19 Nm
  • Socket O.D. = 19.5mm
  • Socket Lenght = 126mm
  • Do not tighten with power tools
  • 16mm Bi-Hex (12points) drive spark plug socket wrench
  • Max. Torque 20Nm
  • Socket O.D. = 20.8mm
  • Socket Lenght = 126mm
  • Do not tighten with power tools
Country of Origin :Taiwan
SKU : SPW14T
1pc x s$55.00
3pcs x s$53.00
5pcs x s$52.00
Stock : 4pcs available
 
SKU : SPW16T
1pc x s$55.00
3pcs x s$53.00
5pcs x s$52.00
Stock : 4pcs available
: Flyer

4-Way Tie Rod Ball Joint Separator
SKU :TR4W
Country of Origin : Taiwan
1pc x s$96.00
3pcs x s$93.00
5pcs x s$91.00
Stock : 3pcs available
: Flyer
  • The tool can be adjusted to remove ball joints of various heights,
  • Heat-treated drop forged steel body & bolt for long rough usage
  • Spread ball joints easily where space prevents use of direct action method.
  • Total Length : 165mm
  • Opening Angle : 24 ~ 45 m
  • Jaw Opening : 20 mm
  • Body material : SCM440

Microprocessor Controlled 6 & 12volt 2amp Battery Charger / Maintainer
  • A fully automatic, microprocessor controlled unit delivering a maximum charge rate of 2 amps.
  • It is suitable for 6 or 12 volt batteries with capacities between 10AH to 80AH.
  • It is a maintenance battery charger, suitable for regular (sealed or unsealed) Lead Acid batteries and for AGM (absorbed glass mat) batteries used on motorcycles, cars and light commercial vehicles.
  • It charges in three stages.
  • It features short-circuit protection, overload current protection, and over voltage protection.
  • Weight: 683g
SKU : BC715
Brand/Country : Gunson / UK
s$118.00
Stock : 5pcs available
: User Guide

Large Suction Cups with Stud Screw & Brass Nut
SKU : SC601
Brand/Country : USA
8pcs x s$5.90
20pcs x s$5.60
30pcs = s$5.40
Stock : 50pcs available
  • With professional look and reliability
  • Diameter: 64mm (2.75")
  • Holds up to 3.2kgs in weight.
  • The preferred hanger for screw-mountable signs, radar detectors, thermometers, bird feeders, and more.
  • Brass knurled nut included.
  • This product fixes securely to any clean, dry, slick, shiny, smooth, non textured, non-porous surafce , like glass, mirrors, glossy plastic, glazed ceramic tiles, car body work etc.

 

Prices & Stocks are subjected to change without prior notice